{
  "id": 2397,
  "url": "https://nnemf.org/research/2397-micromachined-mmwave-28-0-38-0-ghz-mimo",
  "title": "Micromachined mmWave 28.0/38.0 GHz MIMO antenna loaded with frequency selective surface for gain enhancement and SAR analysis for future wireless applications.",
  "authors": [
    "Manish Sharma",
    "Bhaskara Rao Perli",
    "Geetanjali Singla",
    "Tathababu Addepalli",
    "Sivasubramanyam Medasani",
    "B Satya Sridevi",
    "Tanweer Ali"
  ],
  "journal": "PloS one",
  "year": "2026",
  "doi": "10.1371/journal.pone.0342022",
  "pmid": "41650007",
  "abstract": "The presented work describes the four-port multiple-input multiple-output (MIMO) antenna designed on Rogers substrate with a thickness of 0.787 mm. The core of the MIMO antenna includes a hexagonal-patch etched by a rectangular slot and an etched hexagonal-ring in full-ground, which are printed on opposite surfaces, generating measured millimeter-wave (mmWave) bandwidth of 26.45 GHz-29.27 GHz and 37.04 GHz-39.12 GHz. The dielectric material is micromachined, and the four-port radiating elements maintain isolation of more than 20.0 dB with an overall size of 17.0 mm × 22.0 mm × 0.787 mm. The novel 11 × 11 hexagonal-ring frequency-selective-surface (FSS) is placed below the MIMO antenna, enhancing the peak-gain by 5.16 dBi with a size of 42.50 mm × 42.50 mm printed on Rogers5880 0.787 mm thickness. The MIMO antenna also features good diversity-performance with ECCmmWave-FSS < 0.18, DGmmWave-FSS > 9.995 dB, TARCmmWave-FSS < -4.76 dB, and CCLmmWave-FSS < 0.30 b/s/Hz. The cumulative features with dual millimeter wave bands, enhanced peak-realized gain, suppressed back-lobe radiations, and good diversity performance make the proposed MIMO antenna loaded with FSS suitable for 5G, satellite-communication, IoT, and smart cities applications. The MIMO antenna loaded with FSS is also subjected for SAR analysis for input power of 50 mW and 500 mW.",
  "effect": "unclear",
  "evidence": "insufficient",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "unclear",
    "evidenceLabel": "Insufficient",
    "population": "—",
    "sampleSize": "—",
    "exposure": "RF >3000 MHz",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "A four-port micromachined mmWave MIMO antenna on Rogers substrate achieved measured bandwidths of 26.45–29.27 GHz and 37.04–39.12 GHz with >20 dB isolation. An 11×11 hexagonal-ring FSS placed below the antenna increased peak gain by 5.16 dBi, and the design was subjected to SAR analysis at 50 mW and 500 mW input power.",
    "outcomes": [
      "Antenna bandwidth (26.45–29.27 GHz",
      "37.04–39.12 GHz)",
      "Isolation (>20 dB)",
      "Peak realized gain enhancement (with FSS)",
      "Diversity metrics (ECC",
      "DG",
      "TARC",
      "CCL)",
      "Back-lobe radiation suppression",
      "SAR analysis at input powers 50 mW and 500 mW"
    ],
    "limitations": [
      "No SAR values or compliance comparison reported in the abstract",
      "No biological/health outcomes or exposed population described"
    ],
    "keywords": [
      "mmWave",
      "28 GHz",
      "38 GHz",
      "MIMO antenna",
      "frequency selective surface (FSS)",
      "gain enhancement",
      "SAR analysis",
      "5G",
      "satellite communication",
      "IoT",
      "smart cities"
    ],
    "hubs": [
      {
        "slug": "5g-policy",
        "weight": "0.7",
        "reason": "Mentions suitability for 5G applications and mmWave bands (28/38 GHz), but the paper is primarily antenna engineering rather than policy."
      }
    ],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": \"mmWave\",\n    \"source\": \"antenna (MIMO) for wireless applications\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"Antenna bandwidth (26.45–29.27 GHz; 37.04–39.12 GHz)\",\n    \"Isolation (>20 dB)\",\n    \"Peak realized gain enhancement (with FSS)\",\n    \"Diversity metrics (ECC, DG, TARC, CCL)\",\n    \"Back-lobe radiation suppression\",\n    \"SAR analysis at input powers 50 mW and 500 mW\"\n  ],\n  \"main_findings\": \"A four-port micromachined mmWave MIMO antenna on Rogers substrate achieved measured bandwidths of 26.45–29.27 GHz and 37.04–39.12 GHz with >20 dB isolation. An 11×11 hexagonal-ring FSS placed below the antenna increased peak gain by 5.16 dBi, and the design was subjected to SAR analysis at 50 mW and 500 mW input power.\",\n  \"effect_direction\": \"unclear\",\n  \"limitations\": [\n    \"No SAR values or compliance comparison reported in the abstract\",\n    \"No biological/health outcomes or exposed population described\"\n  ],\n  \"evidence_strength\": \"insufficient\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"mmWave\",\n    \"28 GHz\",\n    \"38 GHz\",\n    \"MIMO antenna\",\n    \"frequency selective surface (FSS)\",\n    \"gain enhancement\",\n    \"SAR analysis\",\n    \"5G\",\n    \"satellite communication\",\n    \"IoT\",\n    \"smart cities\"\n  ],\n  \"suggested_hubs\": [\n    {\n      \"slug\": \"5g-policy\",\n      \"weight\": 0.2,\n      \"reason\": \"Mentions suitability for 5G applications and mmWave bands (28/38 GHz), but the paper is primarily antenna engineering rather than policy.\"\n    }\n  ]\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/41650007/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=2397",
  "updated": "2026-02-07 20:47:02"
}