{
  "id": 2558,
  "url": "https://nnemf.org/research/2558-assessment-of-spatial-average-absorbed-power-density-and",
  "title": "Assessment of spatial-average absorbed power density and peak temperature rise in skin model under localized electromagnetic exposure",
  "authors": [
    "Zheng J, Zhang Y, Diao Y, Shi D"
  ],
  "journal": "Radiation Protection Dosimetry",
  "year": "2025",
  "doi": "10.1093/rpd/ncaf096",
  "pmid": "40817877",
  "abstract": "Category: Biophysics, Dosimetry Tags: EMF exposure, skin dosimetry, spatial-average absorbed power density, temperature rise, vasculature modeling, body tissues, 3-30 GHz DOI: 10.1093/rpd/ncaf096 URL: https://pubmed.ncbi.nlm.nih.gov/40817877/ Overview This study investigates the spatial-average absorbed power density (APD) and temperature rise in human skin models subjected to localized electromagnetic field (EMF) exposure. The research employs advanced numerical dosimetry using multi-layer models that include critical tissue components such as skin, fat, and muscle. Methods - Developed a synthetic blood vessel model and integrated it within multi-layer skin constructs. - Performed electromagnetic computations over a frequency range of 3 to 30 GHz. - Evaluated steady-state temperature increase using the Pennes bioheat transfer equation. - Compared simulations both with and without vasculature variations and assessed different endpoint diameters. Findings - Effect of vascular modeling on peak spatial-averaged APD was found to be negligible. - Influence on peak temperature rise due to vasculature was ~8% at 3 GHz, dropping below 3% above 6 GHz. - Endpoint diameter effect was marginal on both APD and peak temperature rise. - Observed variations were smaller than those caused by changes in tissue thickness, dielectric, or thermal properties. Conclusion Although the impact of vasculature on EMF-induced temperature increase is modest, its inclusion refines the accuracy of localized thermal distribution predictions. This suggests that future anatomical modeling for EMF safety should consider detailed vascular representation for enhanced dosimetry precision.",
  "effect": "mixed",
  "evidence": "low",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "mixed",
    "evidenceLabel": "Low",
    "population": "—",
    "sampleSize": "—",
    "exposure": "RF >3000 MHz",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "Numerical dosimetry simulations in multi-layer skin models (skin/fat/muscle) over 3–30 GHz found negligible effects of vascular modeling on peak spatial-averaged absorbed power density. Vasculature influenced peak temperature rise by ~8% at 3 GHz and by <3% above 6 GHz; endpoint diameter effects were marginal, and these variations were smaller than those from tissue thickness or dielectric/thermal property changes.",
    "outcomes": [
      "spatial-average absorbed power density (APD)",
      "peak temperature rise in skin model",
      "effect of vasculature modeling on APD and temperature rise",
      "effect of endpoint diameter on APD and temperature rise"
    ],
    "limitations": [],
    "keywords": [
      "dosimetry",
      "skin model",
      "absorbed power density",
      "temperature rise",
      "Pennes bioheat equation",
      "vasculature modeling",
      "3-30 GHz",
      "localized exposure"
    ],
    "hubs": [
      {
        "slug": "who-icnirp",
        "weight": "0.7",
        "reason": "Study focuses on RF dosimetry metrics (absorbed power density) and temperature rise relevant to exposure guideline assessment."
      }
    ],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": \"RF\",\n    \"source\": \"localized electromagnetic exposure\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"spatial-average absorbed power density (APD)\",\n    \"peak temperature rise in skin model\",\n    \"effect of vasculature modeling on APD and temperature rise\",\n    \"effect of endpoint diameter on APD and temperature rise\"\n  ],\n  \"main_findings\": \"Numerical dosimetry simulations in multi-layer skin models (skin/fat/muscle) over 3–30 GHz found negligible effects of vascular modeling on peak spatial-averaged absorbed power density. Vasculature influenced peak temperature rise by ~8% at 3 GHz and by <3% above 6 GHz; endpoint diameter effects were marginal, and these variations were smaller than those from tissue thickness or dielectric/thermal property changes.\",\n  \"effect_direction\": \"mixed\",\n  \"limitations\": [],\n  \"evidence_strength\": \"low\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"dosimetry\",\n    \"skin model\",\n    \"absorbed power density\",\n    \"temperature rise\",\n    \"Pennes bioheat equation\",\n    \"vasculature modeling\",\n    \"3-30 GHz\",\n    \"localized exposure\"\n  ],\n  \"suggested_hubs\": [\n    {\n      \"slug\": \"who-icnirp\",\n      \"weight\": 0.42,\n      \"reason\": \"Study focuses on RF dosimetry metrics (absorbed power density) and temperature rise relevant to exposure guideline assessment.\"\n    }\n  ]\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/40817877/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=2558",
  "updated": "2026-02-12 22:12:20"
}