Share

Effect of elevation on cumulative radiofrequency exposure from multiple communication towers

Osei S, Quarshie E, Azah CK, Fuseini A-R, Dogbey R, Deatanyah P, Hagan GB, Hodasi JAM, Sam F, Amoako JK

PAPERmanualRadiation Protection Dosimetry2025exposure assessmentEffect: unclearEvidence: Insufficient

Abstract

Category: Radiation Protection / Environmental Health Institution: University in Ghana (Specific name not provided) Tags: radiofrequency exposure, elevation, communication towers, EMF, university campus, Ghana, 900 MHz band DOI: 10.1093/rpd/ncaf068 URL: academic.oup.com Overview University campuses, especially those in densely populated areas, require robust internet and communication connectivity to support academic activities. In Ghana, this has led to the proliferation of communication antennas on university grounds. This study examines how radiofrequency (RF) power density changes with elevation, specifically across different floors of high-rise university buildings. Methodology - Measurements were conducted using a spectrum analyser paired with a log-periodic antenna. - RF power density was recorded at various floor elevations within a public university building. Findings - RF power density decreased from the ground floor up to the third floor. - On the fourth (top) floor, RF power density reached its maximum. - The observed variation underscores the significant influence of building elevation on EMF exposure levels. - The 900 MHz frequency band produced the highest measured power density (1.16E-03 W/m2), highlighting its prevalent use for campus communication applications. Conclusion These findings emphasize a direct connection between elevation within high-rise buildings and cumulative exposure to EMF from surrounding communication towers. Notably, heightened RF power densities at higher elevations may increase EMF health risks for occupants on upper floors, particularly in environments with heavy reliance on 900 MHz communication bands.

AI evidence extraction

At a glance
Study type
exposure assessment
Effect direction
unclear
Population
Occupants of a public university building (Ghana)
Sample size
—
Exposure
RF communication towers · 900 MHz
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

RF power density decreased from the ground floor to the third floor, then was highest on the fourth (top) floor. The 900 MHz band had the highest measured power density (1.16E-03 W/m²).

Outcomes measured

  • RF power density (W/m²) by floor elevation
  • Maximum measured power density in 900 MHz band

Limitations

  • Sample size not reported
  • Single setting described (a public university building)
  • generalizability unclear
  • Measurement timing/duration and number of measurement points not reported
  • No health outcomes measured (exposure assessment only)

Suggested hubs

  • occupational-exposure (0.7)
    Measurements taken within a university building where staff/students may be exposed during routine activities.
View raw extracted JSON
{
  "study_type": "exposure_assessment",
  "exposure": {
    "band": "RF",
    "source": "communication towers",
    "frequency_mhz": 900,
    "sar_wkg": null,
    "duration": null
  },
  "population": "Occupants of a public university building (Ghana)",
  "sample_size": null,
  "outcomes": [
    "RF power density (W/m²) by floor elevation",
    "Maximum measured power density in 900 MHz band"
  ],
  "main_findings": "RF power density decreased from the ground floor to the third floor, then was highest on the fourth (top) floor. The 900 MHz band had the highest measured power density (1.16E-03 W/m²).",
  "effect_direction": "unclear",
  "limitations": [
    "Sample size not reported",
    "Single setting described (a public university building); generalizability unclear",
    "Measurement timing/duration and number of measurement points not reported",
    "No health outcomes measured (exposure assessment only)"
  ],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "radiofrequency exposure",
    "RF power density",
    "elevation",
    "floor level",
    "communication towers",
    "spectrum analyser",
    "log-periodic antenna",
    "university campus",
    "Ghana",
    "900 MHz"
  ],
  "suggested_hubs": [
    {
      "slug": "occupational-exposure",
      "weight": 0.32,
      "reason": "Measurements taken within a university building where staff/students may be exposed during routine activities."
    }
  ]
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 2607

Effect of elevation on cumulative radiofrequency exposure from multiple communication towers · Non-native EMF