Share

Influence of Growth Rate and Magnetic Field on Microstructure and Properties of Directionally Solidified Ag-Cu Eutectic Alloy.

Xiaowei Zuo, Congcong Zhao, Lin Zhang, Engang Wang

PAPERpubmedMaterials (Basel, Switzerland)2016engineeringEffect: mixedEvidence: Insufficient

Abstract

We report the influence of growth rate and external magnetic field on the eutectic lamellar spacing and properties of directionally-solidified Ag-Cu eutectic alloys. The results indicated that the relationship between the lamellar spacing of directionally-solidified Ag-Cu alloys and the growth rate matched the prediction of the Jackson-Hunt model, and the constant was 5.8 µm³/s. The increasing external magnetic field during solidification tilted the growth direction of the lamellar eutectics, and coarsened the eutectic lamellar spacing. These decreased the microhardness and strength of Ag-Cu alloys, but increased their electrical conductivity. The competitive strengthening contributions between the refinement of the eutectic lamellar spacing and the change in growth direction of the eutectics resulted in higher strength in the as-rolled sample with a 0.8 T magnetic field than with other samples, which was confirmed from higher relieved deformation energy using differential scanning calorimetry.

AI evidence extraction

At a glance
Study type
engineering
Effect direction
mixed
Population
—
Sample size
—
Exposure
external magnetic field during solidification
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

In directionally solidified Ag-Cu eutectic alloys, increasing external magnetic field during solidification tilted the growth direction of lamellar eutectics and coarsened eutectic lamellar spacing. These changes decreased microhardness and strength but increased electrical conductivity. An as-rolled sample with a 0.8 T magnetic field showed higher strength than other samples, supported by higher relieved deformation energy on differential scanning calorimetry.

Outcomes measured

  • eutectic lamellar spacing
  • growth direction/tilting of lamellar eutectics
  • microhardness
  • strength
  • electrical conductivity
  • relieved deformation energy (differential scanning calorimetry)

Limitations

  • Magnetic field frequency/waveform not described (only field strength mentioned).
  • No sample size or detailed experimental design information provided in the abstract.
  • Findings are for material microstructure/properties
  • no biological/health outcomes assessed.
View raw extracted JSON
{
  "study_type": "engineering",
  "exposure": {
    "band": null,
    "source": "external magnetic field during solidification",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "eutectic lamellar spacing",
    "growth direction/tilting of lamellar eutectics",
    "microhardness",
    "strength",
    "electrical conductivity",
    "relieved deformation energy (differential scanning calorimetry)"
  ],
  "main_findings": "In directionally solidified Ag-Cu eutectic alloys, increasing external magnetic field during solidification tilted the growth direction of lamellar eutectics and coarsened eutectic lamellar spacing. These changes decreased microhardness and strength but increased electrical conductivity. An as-rolled sample with a 0.8 T magnetic field showed higher strength than other samples, supported by higher relieved deformation energy on differential scanning calorimetry.",
  "effect_direction": "mixed",
  "limitations": [
    "Magnetic field frequency/waveform not described (only field strength mentioned).",
    "No sample size or detailed experimental design information provided in the abstract.",
    "Findings are for material microstructure/properties; no biological/health outcomes assessed."
  ],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "Ag-Cu eutectic alloy",
    "directional solidification",
    "growth rate",
    "external magnetic field",
    "lamellar spacing",
    "microhardness",
    "strength",
    "electrical conductivity",
    "Jackson-Hunt model",
    "differential scanning calorimetry"
  ],
  "suggested_hubs": [
    {
      "slug": "engineering-materials-processing",
      "weight": 0.9,
      "reason": "Study examines effects of an external magnetic field (0.8 T mentioned) on alloy solidification microstructure and properties."
    }
  ]
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 2860

Influence of Growth Rate and Magnetic Field on Microstructure and Properties of Directionally Solidified Ag-Cu Eutectic Alloy. · Non-native EMF