Share

Magnetic field tunability of optical microfiber taper integrated with ferrofluid.

Yinping Miao, Jixuan Wu, Wei Lin, Kailiang Zhang, Yujie Yuan, Binbin Song, Hao Zhang, Bo Liu, Jianquan Yao

PAPERpubmedOptics express2013engineeringEffect: unclearEvidence: Insufficient

Abstract

Optical microfiber taper has unique propagation properties, which provides versatile waveguide structure to design the tunable photonic devices. In this paper, the S-tapered microfiber is fabricated by using simple fusion spicing. The spectral characteristics of microfiber taper integrated with ferrofluid under different magnetic-field intensities have been theoretically analyzed and experimentally demonstrated. The spectrum are both found to become highly magnetic-field-dependent. The results indicate the transmission and wavelength of the dips are adjustable by changing magnetic field intensity. The response of this device to the magnetic field intensity exhibits a Langvin function. Moreover, there is a linear relationship between the transmission loss and magnetic field intensity for a magnetic field intensity range of 25 to 200Oe, and the sensitivities as high as 0.13056dB/Oe and 0.056nm/Oe have been achieved, respectively. This suggests a potential application of this device as a tunable all-in-fiber photonic device, such as magneto-optic modulator, filter, and sensing element.

AI evidence extraction

At a glance
Study type
engineering
Effect direction
unclear
Population
—
Sample size
—
Exposure
magnetic field (device tuning)
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

The spectral characteristics of an S-tapered optical microfiber integrated with ferrofluid were theoretically analyzed and experimentally demonstrated to be highly dependent on magnetic-field intensity. Transmission loss and dip wavelength were adjustable with magnetic field intensity; a linear relationship between transmission loss and magnetic field intensity was reported over 25–200 Oe, with sensitivities up to 0.13056 dB/Oe and 0.056 nm/Oe.

Outcomes measured

  • Optical transmission loss vs magnetic field intensity
  • Wavelength shift (dip wavelength) vs magnetic field intensity
  • Magnetic-field-dependent spectral characteristics
  • Sensitivity (dB/Oe and nm/Oe)
View raw extracted JSON
{
  "study_type": "engineering",
  "exposure": {
    "band": null,
    "source": "magnetic field (device tuning)",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "Optical transmission loss vs magnetic field intensity",
    "Wavelength shift (dip wavelength) vs magnetic field intensity",
    "Magnetic-field-dependent spectral characteristics",
    "Sensitivity (dB/Oe and nm/Oe)"
  ],
  "main_findings": "The spectral characteristics of an S-tapered optical microfiber integrated with ferrofluid were theoretically analyzed and experimentally demonstrated to be highly dependent on magnetic-field intensity. Transmission loss and dip wavelength were adjustable with magnetic field intensity; a linear relationship between transmission loss and magnetic field intensity was reported over 25–200 Oe, with sensitivities up to 0.13056 dB/Oe and 0.056 nm/Oe.",
  "effect_direction": "unclear",
  "limitations": [],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "optical microfiber taper",
    "S-tapered microfiber",
    "ferrofluid",
    "magnetic field tunability",
    "magneto-optic",
    "photonic device",
    "sensor",
    "transmission loss",
    "wavelength shift",
    "Langvin function",
    "sensitivity"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 3109

Magnetic field tunability of optical microfiber taper integrated with ferrofluid. · Non-native EMF