{
  "id": 3337,
  "url": "https://nnemf.org/research/3337-focused-ion-beam-assisted-magnet-fabrication-and-manipulation",
  "title": "Focused-ion-beam-assisted magnet fabrication and manipulation for magnetic field detection applications.",
  "authors": [
    "Humberto Campanella",
    "R P del Real",
    "Marina Díaz-Michelena",
    "Marta Duch",
    "Héctor Guerrero",
    "Jaume Esteve",
    "José A Plaza"
  ],
  "journal": "ACS applied materials & interfaces",
  "year": "2009",
  "doi": "10.1021/am800205d",
  "pmid": "20355970",
  "abstract": "A focused-ion-beam-assisted technique intended for ultrasmall, hard-magnet fabrication has been developed. By means of ion-beam-induced milling and deposition, reduced-size NdFeB magnets were extracted from a macroscopic quarry and bonded to the surface of a thin-film bulk acoustic resonator (FBAR). Electrical characterization of the FBAR before and after bonding of the magnet was carried out, thus observing both a downshifting of the resonance frequency and a reduction of the quality factor of the resonator. The magnetic behavior of the nanomagnet has been confirmed by means of magnetometry measurements based on atomic force microscopy.",
  "effect": "unclear",
  "evidence": "insufficient",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "unclear",
    "evidenceLabel": "Insufficient",
    "population": "—",
    "sampleSize": "—",
    "exposure": "",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "A focused-ion-beam-assisted milling/deposition technique was used to fabricate reduced-size NdFeB magnets and bond them to a thin-film bulk acoustic resonator (FBAR). Electrical characterization showed a downshift in resonance frequency and a reduction in the resonator quality factor after magnet bonding; magnetic behavior was confirmed using AFM-based magnetometry.",
    "outcomes": [
      "FBAR resonance frequency shift after bonding NdFeB nanomagnet",
      "FBAR quality factor change after bonding NdFeB nanomagnet",
      "Magnetic behavior confirmation via AFM-based magnetometry"
    ],
    "limitations": [],
    "keywords": [
      "focused ion beam",
      "NdFeB",
      "nanomagnet",
      "hard magnet fabrication",
      "thin-film bulk acoustic resonator",
      "FBAR",
      "resonance frequency",
      "quality factor",
      "AFM magnetometry"
    ],
    "hubs": [],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": null,\n    \"source\": null,\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"FBAR resonance frequency shift after bonding NdFeB nanomagnet\",\n    \"FBAR quality factor change after bonding NdFeB nanomagnet\",\n    \"Magnetic behavior confirmation via AFM-based magnetometry\"\n  ],\n  \"main_findings\": \"A focused-ion-beam-assisted milling/deposition technique was used to fabricate reduced-size NdFeB magnets and bond them to a thin-film bulk acoustic resonator (FBAR). Electrical characterization showed a downshift in resonance frequency and a reduction in the resonator quality factor after magnet bonding; magnetic behavior was confirmed using AFM-based magnetometry.\",\n  \"effect_direction\": \"unclear\",\n  \"limitations\": [],\n  \"evidence_strength\": \"insufficient\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"focused ion beam\",\n    \"NdFeB\",\n    \"nanomagnet\",\n    \"hard magnet fabrication\",\n    \"thin-film bulk acoustic resonator\",\n    \"FBAR\",\n    \"resonance frequency\",\n    \"quality factor\",\n    \"AFM magnetometry\"\n  ],\n  \"suggested_hubs\": []\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/20355970/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=3337",
  "updated": "2026-02-13 07:19:25"
}