{
  "id": 3470,
  "url": "https://nnemf.org/research/3470-a-dual-band-wireless-power-and-data-telemetry",
  "title": "A dual band wireless power and data telemetry for retinal prosthesis.",
  "authors": [
    "Guoxing Wang",
    "Wentai Liu",
    "Mohanasankar Sivaprakasam",
    "Mingcui Zhou",
    "James D Weiland",
    "Mark S Humayun"
  ],
  "journal": "Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual Conference",
  "year": "2006",
  "doi": "10.1109/iembs.2006.260470",
  "pmid": "17946243",
  "abstract": "Inductive coupling is commonly used for wireless power and data transfer in biomedical telemetry systems. The increasing demand on the performance of medical devices requires high data rate and high power efficiency at the same time. If only one radio frequency carrier is used, it is difficult to achieve both high data rate and high power efficiency due to the competing requirements on carrier frequency and system-Q of the power and data transmission. We propose a dual band telemetry system to implement power and data transmission using different frequencies by allocating lower frequency for power transmission and higher frequency for data transmission. However, the magnetic coupling between the power carrier and data carrier will affect the operation of both links. In this paper, this interference is analyzed and design equations are derived, which are used to design coils to maximize the data signal level received at the implant side. A prototype of dual band telemetry for a retinal prosthetic device has been built and experimental results show that both power and data can be transmitted and high data rate can be achieved without compromising the power transmission efficiency.",
  "effect": "unclear",
  "evidence": "insufficient",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "unclear",
    "evidenceLabel": "Insufficient",
    "population": "—",
    "sampleSize": "—",
    "exposure": "RF",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "The authors propose a dual-band inductive telemetry system using a lower frequency for power and a higher frequency for data. A prototype for a retinal prosthetic device was built; experimental results indicated that power and data could be transmitted and that high data rate could be achieved without compromising power transmission efficiency.",
    "outcomes": [
      "Power transmission efficiency",
      "Data transmission/data rate",
      "Interference between power and data carriers",
      "Received data signal level at implant side"
    ],
    "limitations": [
      "Frequencies and exposure metrics (e.g.",
      "field strength",
      "SAR) are not reported in the abstract.",
      "No biological or health outcomes are described",
      "the work focuses on engineering performance.",
      "Prototype/experimental details (setup",
      "quantitative results) are not provided in the abstract."
    ],
    "keywords": [
      "inductive coupling",
      "wireless power transfer",
      "data telemetry",
      "dual band",
      "retinal prosthesis",
      "implant",
      "interference",
      "coil design"
    ],
    "hubs": [],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": \"RF\",\n    \"source\": \"implant telemetry (inductive coupling)\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"Power transmission efficiency\",\n    \"Data transmission/data rate\",\n    \"Interference between power and data carriers\",\n    \"Received data signal level at implant side\"\n  ],\n  \"main_findings\": \"The authors propose a dual-band inductive telemetry system using a lower frequency for power and a higher frequency for data. A prototype for a retinal prosthetic device was built; experimental results indicated that power and data could be transmitted and that high data rate could be achieved without compromising power transmission efficiency.\",\n  \"effect_direction\": \"unclear\",\n  \"limitations\": [\n    \"Frequencies and exposure metrics (e.g., field strength, SAR) are not reported in the abstract.\",\n    \"No biological or health outcomes are described; the work focuses on engineering performance.\",\n    \"Prototype/experimental details (setup, quantitative results) are not provided in the abstract.\"\n  ],\n  \"evidence_strength\": \"insufficient\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"inductive coupling\",\n    \"wireless power transfer\",\n    \"data telemetry\",\n    \"dual band\",\n    \"retinal prosthesis\",\n    \"implant\",\n    \"interference\",\n    \"coil design\"\n  ],\n  \"suggested_hubs\": []\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/17946243/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=3470",
  "updated": "2026-02-13 07:23:43"
}