Share

Optical response of a d-fiber antenna in a finite-element analysis intended for radio-over-fiber applications.

A Bhatti, H S Al-Raweshidy, G Murtaza

PAPERpubmedApplied optics2000engineeringEffect: unclearEvidence: Insufficient

Abstract

An all-fiber antenna with a piezoelectric polymer-coated circular-core D fiber has been characterized by finite-element analysis. The response of the D-fiber antenna was determined over a wide frequency range from 1 to 500 MHz. The modeling predicts an electric-field-induced phase shift of 2.43 x 10(-5) rad/(V/m)/m at 5 MHz. At frequencies higher than 8 MHz the optical response is dominated by radial resonances of the D-fiber-coating composite. From the simulation results a minimum detectable electric field of 41-muV/m has been achieved with a 1-km length of coated D fiber. In addition, a D-fiber antenna network intended for microcellular communications has been analyzed by shot-noise-limited detection.

AI evidence extraction

At a glance
Study type
engineering
Effect direction
unclear
Population
—
Sample size
—
Exposure
1–100 MHz
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

Finite-element modeling of a piezoelectric polymer-coated circular-core D-fiber antenna predicted an electric-field-induced phase shift of 2.43 × 10^-5 rad/(V/m)/m at 5 MHz. The response was modeled from 1 to 500 MHz, with optical response dominated by radial resonances above 8 MHz. Simulations indicated a minimum detectable electric field of 41 µV/m using a 1-km length of coated D fiber, and a D-fiber antenna network for microcellular communications was analyzed under shot-noise-limited detection.

Outcomes measured

  • Optical phase shift response to electric field (rad/(V/m)/m)
  • Frequency-dependent optical response/resonances (1–500 MHz)
  • Minimum detectable electric field (µV/m)
  • Shot-noise-limited detection performance for D-fiber antenna network

Limitations

  • Finite-element simulation/modeling study
  • no experimental validation described in abstract
  • Key parameters (e.g.
  • field strengths used in simulations
  • coating properties
  • boundary conditions) not detailed in abstract
View raw extracted JSON
{
  "study_type": "engineering",
  "exposure": {
    "band": null,
    "source": "fiber antenna / radio-over-fiber (microcellular communications)",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "Optical phase shift response to electric field (rad/(V/m)/m)",
    "Frequency-dependent optical response/resonances (1–500 MHz)",
    "Minimum detectable electric field (µV/m)",
    "Shot-noise-limited detection performance for D-fiber antenna network"
  ],
  "main_findings": "Finite-element modeling of a piezoelectric polymer-coated circular-core D-fiber antenna predicted an electric-field-induced phase shift of 2.43 × 10^-5 rad/(V/m)/m at 5 MHz. The response was modeled from 1 to 500 MHz, with optical response dominated by radial resonances above 8 MHz. Simulations indicated a minimum detectable electric field of 41 µV/m using a 1-km length of coated D fiber, and a D-fiber antenna network for microcellular communications was analyzed under shot-noise-limited detection.",
  "effect_direction": "unclear",
  "limitations": [
    "Finite-element simulation/modeling study; no experimental validation described in abstract",
    "Key parameters (e.g., field strengths used in simulations, coating properties, boundary conditions) not detailed in abstract"
  ],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "finite-element analysis",
    "all-fiber antenna",
    "D fiber",
    "piezoelectric polymer coating",
    "radio-over-fiber",
    "microcellular communications",
    "electric field detection",
    "phase shift",
    "radial resonances",
    "shot-noise-limited detection",
    "1–500 MHz"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 3924

Optical response of a d-fiber antenna in a finite-element analysis intended for radio-over-fiber applications. · Non-native EMF