{
  "id": 3924,
  "url": "https://nnemf.org/research/3924-optical-response-of-a-d-fiber-antenna-in",
  "title": "Optical response of a d-fiber antenna in a finite-element analysis intended for radio-over-fiber applications.",
  "authors": [
    "A Bhatti",
    "H S Al-Raweshidy",
    "G Murtaza"
  ],
  "journal": "Applied optics",
  "year": "2000",
  "doi": "10.1364/ao.39.003626",
  "pmid": "18349934",
  "abstract": "An all-fiber antenna with a piezoelectric polymer-coated circular-core D fiber has been characterized by finite-element analysis. The response of the D-fiber antenna was determined over a wide frequency range from 1 to 500 MHz. The modeling predicts an electric-field-induced phase shift of 2.43 x 10(-5) rad/(V/m)/m at 5 MHz. At frequencies higher than 8 MHz the optical response is dominated by radial resonances of the D-fiber-coating composite. From the simulation results a minimum detectable electric field of 41-muV/m has been achieved with a 1-km length of coated D fiber. In addition, a D-fiber antenna network intended for microcellular communications has been analyzed by shot-noise-limited detection.",
  "effect": "unclear",
  "evidence": "insufficient",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "unclear",
    "evidenceLabel": "Insufficient",
    "population": "—",
    "sampleSize": "—",
    "exposure": "1–100 MHz",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "Finite-element modeling of a piezoelectric polymer-coated circular-core D-fiber antenna predicted an electric-field-induced phase shift of 2.43 × 10^-5 rad/(V/m)/m at 5 MHz. The response was modeled from 1 to 500 MHz, with optical response dominated by radial resonances above 8 MHz. Simulations indicated a minimum detectable electric field of 41 µV/m using a 1-km length of coated D fiber, and a D-fiber antenna network for microcellular communications was analyzed under shot-noise-limited detection.",
    "outcomes": [
      "Optical phase shift response to electric field (rad/(V/m)/m)",
      "Frequency-dependent optical response/resonances (1–500 MHz)",
      "Minimum detectable electric field (µV/m)",
      "Shot-noise-limited detection performance for D-fiber antenna network"
    ],
    "limitations": [
      "Finite-element simulation/modeling study",
      "no experimental validation described in abstract",
      "Key parameters (e.g.",
      "field strengths used in simulations",
      "coating properties",
      "boundary conditions) not detailed in abstract"
    ],
    "keywords": [
      "finite-element analysis",
      "all-fiber antenna",
      "D fiber",
      "piezoelectric polymer coating",
      "radio-over-fiber",
      "microcellular communications",
      "electric field detection",
      "phase shift",
      "radial resonances",
      "shot-noise-limited detection",
      "1–500 MHz"
    ],
    "hubs": [],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": null,\n    \"source\": \"fiber antenna / radio-over-fiber (microcellular communications)\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"Optical phase shift response to electric field (rad/(V/m)/m)\",\n    \"Frequency-dependent optical response/resonances (1–500 MHz)\",\n    \"Minimum detectable electric field (µV/m)\",\n    \"Shot-noise-limited detection performance for D-fiber antenna network\"\n  ],\n  \"main_findings\": \"Finite-element modeling of a piezoelectric polymer-coated circular-core D-fiber antenna predicted an electric-field-induced phase shift of 2.43 × 10^-5 rad/(V/m)/m at 5 MHz. The response was modeled from 1 to 500 MHz, with optical response dominated by radial resonances above 8 MHz. Simulations indicated a minimum detectable electric field of 41 µV/m using a 1-km length of coated D fiber, and a D-fiber antenna network for microcellular communications was analyzed under shot-noise-limited detection.\",\n  \"effect_direction\": \"unclear\",\n  \"limitations\": [\n    \"Finite-element simulation/modeling study; no experimental validation described in abstract\",\n    \"Key parameters (e.g., field strengths used in simulations, coating properties, boundary conditions) not detailed in abstract\"\n  ],\n  \"evidence_strength\": \"insufficient\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"finite-element analysis\",\n    \"all-fiber antenna\",\n    \"D fiber\",\n    \"piezoelectric polymer coating\",\n    \"radio-over-fiber\",\n    \"microcellular communications\",\n    \"electric field detection\",\n    \"phase shift\",\n    \"radial resonances\",\n    \"shot-noise-limited detection\",\n    \"1–500 MHz\"\n  ],\n  \"suggested_hubs\": []\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/18349934/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=3924",
  "updated": "2026-02-13 07:44:09"
}