Influence of discharge parameters on the resultant sputtered crater shapes for a radio frequency glow discharge atomic emission source.

M Parker, M L Hartenstein, R K Marcus

PAPERpubmedAnalytical chemistry1996engineeringEffect: unclearEvidence: Insufficient

Abstract

A parametric study has been conducted on a radio frequency glow discharge atomic emission spectrometry (rf-GD-AES) source to evaluate the sputtering characteristics and resultant crater shapes for both metallic and nonconducting samples. These studies include a determination of how the operating parameters, namely, power and pressure, influence the sputtered crater's depth, the degree of convexity and/or concavity, and the crater bottom roughness. The results imply that many similarities exist between the rf mode of powering and the well-characterized dc powered devices. Some differences are noted, namely, differing crater shapes at low operating pressures and a lesser dependence of crater flatness on the applied voltage, i.e., dc-bias voltage. A new method of quantifying the degree of concavity/convexity is introduced which involves comparison of the calculated (ideal) cross-sectional area to the resultant crater area as measured by a diamond stylus profilometer. The studies indicate that the rf-GD is well suited for depth-resolved analysis under correctly chosen operating conditions, which fortuitously correspond to those used for optimum bulk elemental analyses.

AI evidence extraction

At a glance
Study type
engineering
Effect direction
unclear
Population
β€”
Sample size
β€”
Exposure
RF
Evidence strength
Insufficient
Confidence: 74% Β· Peer-reviewed: yes

Main findings

A parametric study of an rf glow discharge atomic emission spectrometry source found that operating parameters (power and pressure) influence crater depth, convexity/concavity, and bottom roughness for metallic and nonconducting samples. Similarities to dc-powered devices were reported, with differences including differing crater shapes at low pressures and a lesser dependence of crater flatness on applied (dc-bias) voltage. The authors introduce a method to quantify concavity/convexity by comparing an ideal calculated cross-sectional area to the measured crater area, and conclude the rf-GD is well suited for depth-resolved analysis under appropriately chosen conditions.

Outcomes measured

  • Sputtered crater depth
  • Crater convexity/concavity
  • Crater bottom roughness
  • Dependence of crater shape/flatness on operating parameters (power
  • pressure
  • dc-bias voltage)
View raw extracted JSON
{
  "study_type": "engineering",
  "exposure": {
    "band": "RF",
    "source": "radio frequency glow discharge atomic emission spectrometry source",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "Sputtered crater depth",
    "Crater convexity/concavity",
    "Crater bottom roughness",
    "Dependence of crater shape/flatness on operating parameters (power, pressure, dc-bias voltage)"
  ],
  "main_findings": "A parametric study of an rf glow discharge atomic emission spectrometry source found that operating parameters (power and pressure) influence crater depth, convexity/concavity, and bottom roughness for metallic and nonconducting samples. Similarities to dc-powered devices were reported, with differences including differing crater shapes at low pressures and a lesser dependence of crater flatness on applied (dc-bias) voltage. The authors introduce a method to quantify concavity/convexity by comparing an ideal calculated cross-sectional area to the measured crater area, and conclude the rf-GD is well suited for depth-resolved analysis under appropriately chosen conditions.",
  "effect_direction": "unclear",
  "limitations": [],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "radio frequency",
    "glow discharge",
    "atomic emission spectrometry",
    "sputtering",
    "crater shape",
    "power",
    "pressure",
    "dc-bias voltage",
    "profilometer",
    "depth-resolved analysis"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 4184

Influence of discharge parameters on the resultant sputtered crater shapes for a radio frequency glow discharge atomic emission source. Β· Non-native EMF