{
  "id": 4184,
  "url": "https://nnemf.org/research/4184-influence-of-discharge-parameters-on-the-resultant-sputtered",
  "title": "Influence of discharge parameters on the resultant sputtered crater shapes for a radio frequency glow discharge atomic emission source.",
  "authors": [
    "M Parker",
    "M L Hartenstein",
    "R K Marcus"
  ],
  "journal": "Analytical chemistry",
  "year": "1996",
  "doi": "10.1021/ac960259t",
  "pmid": "21619332",
  "abstract": "A parametric study has been conducted on a radio frequency glow discharge atomic emission spectrometry (rf-GD-AES) source to evaluate the sputtering characteristics and resultant crater shapes for both metallic and nonconducting samples. These studies include a determination of how the operating parameters, namely, power and pressure, influence the sputtered crater's depth, the degree of convexity and/or concavity, and the crater bottom roughness. The results imply that many similarities exist between the rf mode of powering and the well-characterized dc powered devices. Some differences are noted, namely, differing crater shapes at low operating pressures and a lesser dependence of crater flatness on the applied voltage, i.e., dc-bias voltage. A new method of quantifying the degree of concavity/convexity is introduced which involves comparison of the calculated (ideal) cross-sectional area to the resultant crater area as measured by a diamond stylus profilometer. The studies indicate that the rf-GD is well suited for depth-resolved analysis under correctly chosen operating conditions, which fortuitously correspond to those used for optimum bulk elemental analyses.",
  "effect": "unclear",
  "evidence": "insufficient",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "unclear",
    "evidenceLabel": "Insufficient",
    "population": "—",
    "sampleSize": "—",
    "exposure": "RF",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "A parametric study of an rf glow discharge atomic emission spectrometry source found that operating parameters (power and pressure) influence crater depth, convexity/concavity, and bottom roughness for metallic and nonconducting samples. Similarities to dc-powered devices were reported, with differences including differing crater shapes at low pressures and a lesser dependence of crater flatness on applied (dc-bias) voltage. The authors introduce a method to quantify concavity/convexity by comparing an ideal calculated cross-sectional area to the measured crater area, and conclude the rf-GD is well suited for depth-resolved analysis under appropriately chosen conditions.",
    "outcomes": [
      "Sputtered crater depth",
      "Crater convexity/concavity",
      "Crater bottom roughness",
      "Dependence of crater shape/flatness on operating parameters (power",
      "pressure",
      "dc-bias voltage)"
    ],
    "limitations": [],
    "keywords": [
      "radio frequency",
      "glow discharge",
      "atomic emission spectrometry",
      "sputtering",
      "crater shape",
      "power",
      "pressure",
      "dc-bias voltage",
      "profilometer",
      "depth-resolved analysis"
    ],
    "hubs": [],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": \"RF\",\n    \"source\": \"radio frequency glow discharge atomic emission spectrometry source\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"Sputtered crater depth\",\n    \"Crater convexity/concavity\",\n    \"Crater bottom roughness\",\n    \"Dependence of crater shape/flatness on operating parameters (power, pressure, dc-bias voltage)\"\n  ],\n  \"main_findings\": \"A parametric study of an rf glow discharge atomic emission spectrometry source found that operating parameters (power and pressure) influence crater depth, convexity/concavity, and bottom roughness for metallic and nonconducting samples. Similarities to dc-powered devices were reported, with differences including differing crater shapes at low pressures and a lesser dependence of crater flatness on applied (dc-bias) voltage. The authors introduce a method to quantify concavity/convexity by comparing an ideal calculated cross-sectional area to the measured crater area, and conclude the rf-GD is well suited for depth-resolved analysis under appropriately chosen conditions.\",\n  \"effect_direction\": \"unclear\",\n  \"limitations\": [],\n  \"evidence_strength\": \"insufficient\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"radio frequency\",\n    \"glow discharge\",\n    \"atomic emission spectrometry\",\n    \"sputtering\",\n    \"crater shape\",\n    \"power\",\n    \"pressure\",\n    \"dc-bias voltage\",\n    \"profilometer\",\n    \"depth-resolved analysis\"\n  ],\n  \"suggested_hubs\": []\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/21619332/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=4184",
  "updated": "2026-02-13 07:56:19"
}