{
  "id": 4496,
  "url": "https://nnemf.org/research/4496-impact-of-one-s-own-mobile-phone-in",
  "title": "Impact of one's own mobile phone in stand-by mode on personal radiofrequency electromagnetic field exposure.",
  "authors": [
    "Damiano Urbinello",
    "Martin Röösli"
  ],
  "journal": "Journal of exposure science & environmental epidemiology",
  "year": "2013",
  "doi": "10.1038/jes.2012.97",
  "pmid": "23093102",
  "abstract": "When moving around, mobile phones in stand-by mode periodically send data about their positions. The aim of this paper is to evaluate how personal radiofrequency electromagnetic field (RF-EMF) measurements are affected by such location updates. Exposure from a mobile phone handset (uplink) was measured during commuting by using a randomized cross-over study with three different scenarios: disabled mobile phone (reference), an activated dual-band phone and a quad-band phone. In the reference scenario, uplink exposure was highest during train rides (1.19 mW/m(2)) and lowest during car rides in rural areas (0.001 mW/m(2)). In public transports, the impact of one's own mobile phone on personal RF-EMF measurements was not observable because of high background uplink radiation from other people's mobile phone. In a car, uplink exposure with an activated phone was orders of magnitude higher compared with the reference scenario. This study demonstrates that personal RF-EMF exposure is affected by one's own mobile phone in stand-by mode because of its regular location update. Further dosimetric studies should quantify the contribution of location updates to the total RF-EMF exposure in order to clarify whether the duration of mobile phone use, the most common exposure surrogate in the epidemiological RF-EMF research, is actually an adequate exposure proxy.",
  "effect": "mixed",
  "evidence": "moderate",
  "extraction": {
    "studyType": "randomized_trial",
    "studyTypeLabel": "randomized trial",
    "effectDirection": "mixed",
    "evidenceLabel": "Moderate",
    "population": "—",
    "sampleSize": "—",
    "exposure": "RF mobile phone · during commuting (train/public transport and car; stand-by mode with periodic location updates)",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "In a randomized cross-over commuting measurement study, uplink exposure in the reference (disabled phone) scenario was highest during train rides (1.19 mW/m^2) and lowest during rural car rides (0.001 mW/m^2). In public transport, the impact of the participant’s own phone in stand-by mode was not observable due to high background uplink from other people’s phones, whereas in a car an activated phone produced uplink exposure orders of magnitude higher than the reference scenario. The authors conclude that personal RF-EMF exposure measurements are affected by one’s own phone in stand-by mode because of regular location updates.",
    "outcomes": [
      "Personal RF-EMF exposure measurements (uplink) during commuting",
      "Uplink power density (mW/m^2) under different phone stand-by scenarios"
    ],
    "limitations": [
      "Sample size not reported in abstract",
      "Frequencies/bands not quantified beyond dual-band vs quad-band",
      "Exposure metric limited to uplink/power density during commuting",
      "generalizability to other settings not stated",
      "Background exposure from others may mask own-phone contribution in some environments"
    ],
    "keywords": [
      "RF-EMF",
      "personal exposure measurement",
      "mobile phone",
      "stand-by mode",
      "location update",
      "uplink",
      "commuting",
      "randomized cross-over",
      "power density"
    ],
    "hubs": [],
    "raw": "{\n  \"study_type\": \"randomized_trial\",\n  \"exposure\": {\n    \"band\": \"RF\",\n    \"source\": \"mobile phone\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": \"during commuting (train/public transport and car; stand-by mode with periodic location updates)\"\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"Personal RF-EMF exposure measurements (uplink) during commuting\",\n    \"Uplink power density (mW/m^2) under different phone stand-by scenarios\"\n  ],\n  \"main_findings\": \"In a randomized cross-over commuting measurement study, uplink exposure in the reference (disabled phone) scenario was highest during train rides (1.19 mW/m^2) and lowest during rural car rides (0.001 mW/m^2). In public transport, the impact of the participant’s own phone in stand-by mode was not observable due to high background uplink from other people’s phones, whereas in a car an activated phone produced uplink exposure orders of magnitude higher than the reference scenario. The authors conclude that personal RF-EMF exposure measurements are affected by one’s own phone in stand-by mode because of regular location updates.\",\n  \"effect_direction\": \"mixed\",\n  \"limitations\": [\n    \"Sample size not reported in abstract\",\n    \"Frequencies/bands not quantified beyond dual-band vs quad-band\",\n    \"Exposure metric limited to uplink/power density during commuting; generalizability to other settings not stated\",\n    \"Background exposure from others may mask own-phone contribution in some environments\"\n  ],\n  \"evidence_strength\": \"moderate\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"RF-EMF\",\n    \"personal exposure measurement\",\n    \"mobile phone\",\n    \"stand-by mode\",\n    \"location update\",\n    \"uplink\",\n    \"commuting\",\n    \"randomized cross-over\",\n    \"power density\"\n  ],\n  \"suggested_hubs\": []\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/23093102/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=4496",
  "updated": "2026-02-14 07:59:00"
}