{
  "id": 4525,
  "url": "https://nnemf.org/research/4525-microstructure-and-electrical-property-of-tinx-films-deposited",
  "title": "Microstructure and electrical property of TiNx films deposited by DC reactive magnetron sputtering superimposed electromagnetic field system.",
  "authors": [
    "Ji Bong Park",
    "Jung Hyuk Kim",
    "Sang Hyun Cho",
    "Chung Gil Kang",
    "Pung Keun Song"
  ],
  "journal": "Journal of nanoscience and nanotechnology",
  "year": "2012",
  "doi": "10.1166/jnn.2012.4600",
  "pmid": "22629939",
  "abstract": "TiNx films were successfully deposited by DC reactive magnetron sputtering superimposed EMF system without substrate heating. In case of DCMS 400 W+ EMF 25 W, electrical property, reflectance and crystallinity of the TiN films were clearly improved by the enhancement of nitrification. The lowest sheet resistance of 2.9 Ω/⟂ (resistivity 5.8 x 10(-5) Ωcm) was observed for the film deposited at F(N)2: 16%. Mixture phases of the (111) plane and (200) plane showed lower resistivity than only (200) single phase. Therefore it is confirmed that introduction of EMF system is promising technology to deposit TiN film.",
  "effect": "benefit",
  "evidence": "insufficient",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "benefit",
    "evidenceLabel": "Insufficient",
    "population": "—",
    "sampleSize": "—",
    "exposure": "superimposed electromagnetic field system (during DC reactive magnetron sputtering)",
    "confidencePct": "74",
    "peerReviewed": "yes",
    "mainFindings": "TiNx (TiN) films deposited using DC reactive magnetron sputtering with a superimposed EMF system showed improved electrical properties, reflectance, and crystallinity compared with the stated DCMS+EMF condition, attributed to enhanced nitrification. The lowest sheet resistance reported was 2.9 Ω/⟂ (resistivity 5.8 × 10^-5 Ω·cm) at F(N)2 = 16%, and mixed (111)/(200) phases had lower resistivity than a (200) single phase.",
    "outcomes": [
      "TiNx/TiN film microstructure",
      "electrical properties (sheet resistance",
      "resistivity)",
      "reflectance",
      "crystallinity",
      "nitrification"
    ],
    "limitations": [
      "No EMF frequency",
      "field strength",
      "or exposure characterization details provided in the abstract",
      "No sample size or number of films/replicates stated",
      "Engineering/materials outcomes only",
      "no biological or health endpoints"
    ],
    "keywords": [
      "TiNx",
      "TiN",
      "DC reactive magnetron sputtering",
      "superimposed EMF system",
      "nitrification",
      "sheet resistance",
      "resistivity",
      "crystallinity",
      "reflectance"
    ],
    "hubs": [],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": null,\n    \"source\": \"superimposed electromagnetic field system (during DC reactive magnetron sputtering)\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"TiNx/TiN film microstructure\",\n    \"electrical properties (sheet resistance, resistivity)\",\n    \"reflectance\",\n    \"crystallinity\",\n    \"nitrification\"\n  ],\n  \"main_findings\": \"TiNx (TiN) films deposited using DC reactive magnetron sputtering with a superimposed EMF system showed improved electrical properties, reflectance, and crystallinity compared with the stated DCMS+EMF condition, attributed to enhanced nitrification. The lowest sheet resistance reported was 2.9 Ω/⟂ (resistivity 5.8 × 10^-5 Ω·cm) at F(N)2 = 16%, and mixed (111)/(200) phases had lower resistivity than a (200) single phase.\",\n  \"effect_direction\": \"benefit\",\n  \"limitations\": [\n    \"No EMF frequency, field strength, or exposure characterization details provided in the abstract\",\n    \"No sample size or number of films/replicates stated\",\n    \"Engineering/materials outcomes only; no biological or health endpoints\"\n  ],\n  \"evidence_strength\": \"insufficient\",\n  \"confidence\": 0.74,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"TiNx\",\n    \"TiN\",\n    \"DC reactive magnetron sputtering\",\n    \"superimposed EMF system\",\n    \"nitrification\",\n    \"sheet resistance\",\n    \"resistivity\",\n    \"crystallinity\",\n    \"reflectance\"\n  ],\n  \"suggested_hubs\": []\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/22629939/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=4525",
  "updated": "2026-02-14 07:59:23"
}