Passive Techniques for Magnetic Field Mitigation in Underground Power
Abstract
Passive Techniques for Magnetic Field Mitigation in Underground Power Systems
AI evidence extraction
At a glance
Study type
engineering
Effect direction
benefit
Population
—
Sample size
—
Exposure
ELF <1 MHz
Evidence strength
Low
Confidence: 74% · Peer-reviewed: unknown
Main findings
Finite-element simulations (FEMM) compared magnetic fields with and without passive mitigation (conductive loop, conductive shield, ferromagnetic shield) for a 69/115 kV underground power system. All simulated techniques reduced magnetic field values to below the referenced ICNIRP/European standards, with results reported as below 10 µT; conductive and ferromagnetic shields mitigated more than a conductive loop.
Outcomes measured
- Magnetic field level reduction (µT)
- Compliance with ICNIRP and European reference values
Limitations
- Simulation study (FEMM) rather than field measurements
- Results stated to be limited by construction conditions (not further specified in abstract)
- No quantitative baseline field values reported in the abstract beyond the post-mitigation level (<10 µT)
Suggested hubs
- occupational-exposure (0.7)Focuses on mitigation of low-frequency magnetic fields from power infrastructure; potentially relevant to occupational/public exposure near underground cables.
- who-icnirp (0.7)Explicitly references ICNIRP reference values/standards for magnetic field limits.
View raw extracted JSON
{
"study_type": "engineering",
"exposure": {
"band": "ELF",
"source": "underground power system (69/115 kV cables)",
"frequency_mhz": null,
"sar_wkg": null,
"duration": null
},
"population": null,
"sample_size": null,
"outcomes": [
"Magnetic field level reduction (µT)",
"Compliance with ICNIRP and European reference values"
],
"main_findings": "Finite-element simulations (FEMM) compared magnetic fields with and without passive mitigation (conductive loop, conductive shield, ferromagnetic shield) for a 69/115 kV underground power system. All simulated techniques reduced magnetic field values to below the referenced ICNIRP/European standards, with results reported as below 10 µT; conductive and ferromagnetic shields mitigated more than a conductive loop.",
"effect_direction": "benefit",
"limitations": [
"Simulation study (FEMM) rather than field measurements",
"Results stated to be limited by construction conditions (not further specified in abstract)",
"No quantitative baseline field values reported in the abstract beyond the post-mitigation level (<10 µT)"
],
"evidence_strength": "low",
"confidence": 0.74,
"peer_reviewed_likely": "unknown",
"keywords": [
"magnetic field mitigation",
"underground power system",
"69 kV",
"115 kV",
"ELF magnetic fields",
"conductive loop",
"conductive shield",
"ferromagnetic shield",
"FEMM",
"ICNIRP",
"European standards"
],
"suggested_hubs": [
{
"slug": "occupational-exposure",
"weight": 0.25,
"reason": "Focuses on mitigation of low-frequency magnetic fields from power infrastructure; potentially relevant to occupational/public exposure near underground cables."
},
{
"slug": "who-icnirp",
"weight": 0.55,
"reason": "Explicitly references ICNIRP reference values/standards for magnetic field limits."
}
]
}AI can be wrong. Always verify against the paper.
AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.
Comments
Log in to comment.
No comments yet.
NNEMF synthesis
Synthesis pending.