Share

Enhanced dechlorination of trichloroethene by sulfidated microscale zero-valent iron under low-frequency AC electromagnetic field.

Feng He, Ye Yu, Wubo Wan, Liyuan Liang

PAPERpubmedJournal of hazardous materials2022OtherEffect: benefitEvidence: Low

Abstract

In this study an electromagnetic heating strategy is proposed for remediation of trichloroethene (TCE) by ball milled, sulfidated microscale zero valent iron (S-mZVI) particles. S-mZVI is ferromagnetic, which generates heat under the application of a low-frequency alternating current electromagnetic field (AC EMF). We found that the temperature reached up to ~120 ℃ during 30-min electromagnetic induction heating of 10 g/L S-mZVI (with S/Fe molar ratio of 0.1), compared with ~55 ℃ and ~80 ℃ for ZVI and ball milled mZVI, respectively. The application of AC EMF accelerated the TCE degradation rate (k = 5.5 × 10 h) by up to 4-fold without compromising or even enhancing electron efficiency of S-mZVI compared to no-heating. Furthermore, this process halved the generation of chlorinated intermediate, cis-DCE. In contrast, water-bath heating only increased the dechlorination rate 2-fold with unchanged cis-DCE generation and lowered electron efficiency. This is attributed to both rising temperature by induction heating and accelerated ZVI corrosion and surface Fe exposure caused by AC EMF. In real groundwater, the AC EMF maintained the same promoting effects for TCE dechlorination by S-mZVI. This study shows that combination of filed-scale available AC EMF with S-mZVI provides a promising approach for remediation of chlorinated hydrocarbons in contaminated groundwater.

AI evidence extraction

At a glance
Study type
Other
Effect direction
benefit
Population
—
Sample size
—
Exposure
ELF other · 30-min electromagnetic induction heating
Evidence strength
Low
Confidence: 74% · Peer-reviewed: yes

Main findings

Sulfidated microscale zero-valent iron (S-mZVI) generated substantially higher temperatures under low-frequency AC electromagnetic field induction heating (~120 °C in 30 min at 10 g/L) than ZVI (~55 °C) or ball-milled mZVI (~80 °C). Applying AC EMF increased the TCE degradation rate up to 4-fold, maintained or enhanced electron efficiency, and halved cis-DCE generation versus no-heating; water-bath heating increased rate 2-fold with unchanged cis-DCE and lowered electron efficiency. Similar promoting effects were observed in real groundwater.

Outcomes measured

  • Temperature increase during induction heating
  • Trichloroethene (TCE) degradation/dechlorination rate
  • Electron efficiency of S-mZVI
  • Generation of chlorinated intermediate cis-DCE
  • Performance in real groundwater

Limitations

  • Frequency and field strength of the AC EMF are not specified in the abstract.
  • No explicit sample sizes/number of replicates reported in the abstract.
  • Study is an engineering/chemical remediation context
  • no biological or health outcomes assessed.
View raw extracted JSON
{
  "study_type": "other",
  "exposure": {
    "band": "ELF",
    "source": "other",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": "30-min electromagnetic induction heating"
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "Temperature increase during induction heating",
    "Trichloroethene (TCE) degradation/dechlorination rate",
    "Electron efficiency of S-mZVI",
    "Generation of chlorinated intermediate cis-DCE",
    "Performance in real groundwater"
  ],
  "main_findings": "Sulfidated microscale zero-valent iron (S-mZVI) generated substantially higher temperatures under low-frequency AC electromagnetic field induction heating (~120 °C in 30 min at 10 g/L) than ZVI (~55 °C) or ball-milled mZVI (~80 °C). Applying AC EMF increased the TCE degradation rate up to 4-fold, maintained or enhanced electron efficiency, and halved cis-DCE generation versus no-heating; water-bath heating increased rate 2-fold with unchanged cis-DCE and lowered electron efficiency. Similar promoting effects were observed in real groundwater.",
  "effect_direction": "benefit",
  "limitations": [
    "Frequency and field strength of the AC EMF are not specified in the abstract.",
    "No explicit sample sizes/number of replicates reported in the abstract.",
    "Study is an engineering/chemical remediation context; no biological or health outcomes assessed."
  ],
  "evidence_strength": "low",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "alternating current electromagnetic field",
    "AC EMF",
    "electromagnetic induction heating",
    "low-frequency",
    "ELF",
    "sulfidated microscale zero-valent iron",
    "S-mZVI",
    "trichloroethene",
    "TCE",
    "dechlorination",
    "groundwater remediation",
    "cis-DCE"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 5676

Enhanced dechlorination of trichloroethene by sulfidated microscale zero-valent iron under low-frequency AC electromagnetic field. · Non-native EMF