Integrated influence of sulfide modification on the reactivity of nanoscale zero-valent iron towards decabromodiphenyl ether under an electromagnetic field.

Kai Yu, Yuxuan Tu, Mao Wan, Yongliang Guo, Shiqi Liu, Huimin Li, Yanchun Fan, Gang Zhao, Songxiong Zhong, Cun Liu, Xubiao Luo

PAPERpubmedJournal of hazardous materials2024OtherEffect: benefitEvidence: Insufficient

Abstract

Individual application of sulfide modification and electromagnetic field (EMF) can enhance the reactivity of nanoscale zero-valent iron (nZVI), yet the potential of both in combination is not clear. This work found that the reactivity of nZVI towards decabromodiphenyl ether was significantly enhanced by the combined effect of sulfidation and EMF. The specific reaction rate constant of nZVI increased by 7 to 10 times. A series of characterization results revealed that the sulfidation level not only affects the inherent reactivity but also the magnetic-induced heating (MIH) and corrosion (MIC) of nZVI. These collectively influence the degradation efficiency of nZVI under EMF. Sulfidation generally diminished the MIH effect. The low degree of sulfidation (S/Fe = 0.1) slightly reduced the MIC effect by 21.4%. However, the high degree of sulfidation (S/Fe = 0.4) led to significantly enhanced MIC effect by 107.1%. For S/Fe = 0.1 and 0.4, the overall enhancement in the reactivity resulting from EMF was alternately dominated by the contributions of MIH and MIC. This work provides valuable insights into the MIH and MIC effects about the sulfidation level of nZVI, which is needed for further exploration and optimization of this combined technology.

AI evidence extraction

At a glance
Study type
Other
Effect direction
benefit
Population
β€”
Sample size
β€”
Exposure
electromagnetic field (laboratory/engineering application)
Evidence strength
Insufficient
Confidence: 74% Β· Peer-reviewed: yes

Main findings

Combined sulfidation and electromagnetic field (EMF) significantly enhanced nZVI reactivity toward decabromodiphenyl ether, increasing the specific reaction rate constant by 7–10 times. Sulfidation level influenced both magnetic-induced heating (MIH) and magnetic-induced corrosion (MIC): sulfidation generally diminished MIH; at S/Fe=0.1 MIC was reduced by 21.4%, while at S/Fe=0.4 MIC increased by 107.1%, with MIH vs MIC alternately dominating overall EMF-related enhancement depending on sulfidation level.

Outcomes measured

  • Reactivity of nanoscale zero-valent iron (nZVI) toward decabromodiphenyl ether
  • Specific reaction rate constant changes under combined sulfidation and EMF
  • Magnetic-induced heating (MIH) effects
  • Magnetic-induced corrosion (MIC) effects
  • Degradation efficiency under EMF as a function of sulfidation level (S/Fe ratios)

Limitations

  • EMF parameters (e.g.
  • frequency
  • field strength) not reported in the abstract
  • No sample size or number of experiments reported in the abstract
  • Engineering/chemical reactivity context
  • no health outcomes assessed
View raw extracted JSON
{
  "study_type": "other",
  "exposure": {
    "band": null,
    "source": "electromagnetic field (laboratory/engineering application)",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "Reactivity of nanoscale zero-valent iron (nZVI) toward decabromodiphenyl ether",
    "Specific reaction rate constant changes under combined sulfidation and EMF",
    "Magnetic-induced heating (MIH) effects",
    "Magnetic-induced corrosion (MIC) effects",
    "Degradation efficiency under EMF as a function of sulfidation level (S/Fe ratios)"
  ],
  "main_findings": "Combined sulfidation and electromagnetic field (EMF) significantly enhanced nZVI reactivity toward decabromodiphenyl ether, increasing the specific reaction rate constant by 7–10 times. Sulfidation level influenced both magnetic-induced heating (MIH) and magnetic-induced corrosion (MIC): sulfidation generally diminished MIH; at S/Fe=0.1 MIC was reduced by 21.4%, while at S/Fe=0.4 MIC increased by 107.1%, with MIH vs MIC alternately dominating overall EMF-related enhancement depending on sulfidation level.",
  "effect_direction": "benefit",
  "limitations": [
    "EMF parameters (e.g., frequency, field strength) not reported in the abstract",
    "No sample size or number of experiments reported in the abstract",
    "Engineering/chemical reactivity context; no health outcomes assessed"
  ],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "electromagnetic field",
    "nanoscale zero-valent iron",
    "nZVI",
    "sulfidation",
    "decabromodiphenyl ether",
    "reactivity",
    "magnetic-induced heating",
    "magnetic-induced corrosion",
    "degradation"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 5855

Integrated influence of sulfide modification on the reactivity of nanoscale zero-valent iron towards decabromodiphenyl ether under an electromagnetic field. Β· Non-native EMF