{
  "id": 5879,
  "url": "https://nnemf.org/research/5879-simulation-and-analysis-of-magnetic-fields-around-high",
  "title": "Simulation and analysis of magnetic fields around High-Voltage power lines using Python for enhanced safety and design insights.",
  "authors": [
    "Pius Erheyovwe Bubu",
    "Val Hyginus Udoka Eze",
    "Awafung Emmanuel Adie",
    "Mundu Muhamad Mustafa",
    "Kelechi John Ukagwu",
    "Lasisi Kamoru Alamu"
  ],
  "journal": "Scientific reports",
  "year": "2025",
  "doi": "10.1038/s41598-025-11464-2",
  "pmid": "41028797",
  "abstract": "Accurate modeling of magnetic fields around high-voltage power lines is essential for public health protection, electromagnetic compatibility (EMC) planning, and infrastructure safety. This study presents a novel, open-source, Python-based simulation framework that rigorously computes magnetic flux density using the Biot-Savart Law, enhanced with ground-air boundary conditions via a modified finite element module. Simulations were conducted for three typical conductor configurations, horizontal, vertical, and triangular (delta) under balanced three-phase loading (132 kV, 100 A per phase), using Aluminium Conductor Steel-Reinforced (ACSR) 'Linnet' conductors mounted 10 m above ground level. The horizontal configuration exhibited the highest peak magnetic flux density, reaching 120 µT directly beneath the conductors and 104.2 µT at 1.5 m height, exceeding the ICNIRP (2020) public exposure limit of 100 µT. In contrast, the triangular layout produced the most uniform field distribution, with a peak of 57.6 µT and a standard deviation of 7.3 µT across the 0-2 m human exposure zone. The vertical arrangement, while exhibiting lower peak intensity, influenced a broader lateral dispersion, indicating potential implications for densely populated environments. Incorporation of ground-air interactions resulted in a 28.3% increase in local field intensity at 1.5 m due to constructive interference, necessitating up to 1.2 m reduction in safety clearance in worst-case exposure scenarios. Field measurements using a precision three-axis gaussmeter (± 0.01 µT) at 5 m, 10 m, and 15 m from the transmission line showed a maximum relative deviation of 0.74%, with absolute error ranging from 6.78 × 10⁻²¹ T to 1.53 × 10⁻⁷ T, validating the model's predictive fidelity. Incorporating boundary effects reduced spatial prediction error by 15-25% compared to boundary-excluded models. The simulation framework, developed using NumPy, SciPy, and Matplotlib, provides a cost-effective, scalable, and regulator-aligned tool for optimizing conductor layouts, mitigating electromagnetic exposure risks, and supporting compliance in transmission routing and urban planning. Future work will integrate conductor non-idealities, dynamic environmental loading, and transient power flow conditions to enhance applicability in smart grid and real-time EMF monitoring scenarios.",
  "effect": "mixed",
  "evidence": "insufficient",
  "extraction": {
    "studyType": "engineering",
    "studyTypeLabel": "engineering",
    "effectDirection": "mixed",
    "evidenceLabel": "Insufficient",
    "population": "—",
    "sampleSize": "—",
    "exposure": "ELF <1 MHz",
    "confidencePct": "78",
    "peerReviewed": "yes",
    "mainFindings": "A Python-based simulation framework (Biot–Savart with modified finite element ground-air boundary conditions) modeled magnetic flux density for three conductor configurations (horizontal, vertical, triangular) under balanced three-phase loading (132 kV, 100 A per phase) at 10 m height. The horizontal configuration produced the highest peak field (120 µT directly beneath; 104.2 µT at 1.5 m), exceeding the ICNIRP (2020) public limit of 100 µT, while the triangular layout had a lower peak (57.6 µT) and more uniform distribution across 0–2 m. Ground-air interactions increased local intensity at 1.5 m by 28.3% and boundary effects reduced spatial prediction error by 15–25%; measurements at 5/10/15 m showed maximum relative deviation 0.74% supporting model validity.",
    "outcomes": [
      "Magnetic flux density (µT) around high-voltage transmission lines",
      "Model validation accuracy vs field measurements",
      "Comparison to ICNIRP (2020) public exposure limit (100 µT)"
    ],
    "limitations": [],
    "keywords": [
      "magnetic fields",
      "magnetic flux density",
      "high-voltage power lines",
      "transmission lines",
      "Biot-Savart law",
      "finite element",
      "ground-air boundary conditions",
      "ICNIRP 2020",
      "public exposure limit",
      "EMC planning",
      "Python",
      "NumPy",
      "SciPy",
      "Matplotlib",
      "gaussmeter",
      "conductor configuration",
      "ACSR Linnet",
      "132 kV",
      "100 A"
    ],
    "hubs": [
      {
        "slug": "who-icnirp",
        "weight": "0.7",
        "reason": "Abstract explicitly compares modeled fields to the ICNIRP (2020) public exposure limit."
      },
      {
        "slug": "occupational-exposure",
        "weight": "0.7",
        "reason": "Mapped from the finder screen onto an existing hub."
      }
    ],
    "raw": "{\n  \"study_type\": \"engineering\",\n  \"exposure\": {\n    \"band\": \"ELF\",\n    \"source\": \"high-voltage power lines\",\n    \"frequency_mhz\": null,\n    \"sar_wkg\": null,\n    \"duration\": null\n  },\n  \"population\": null,\n  \"sample_size\": null,\n  \"outcomes\": [\n    \"Magnetic flux density (µT) around high-voltage transmission lines\",\n    \"Model validation accuracy vs field measurements\",\n    \"Comparison to ICNIRP (2020) public exposure limit (100 µT)\"\n  ],\n  \"main_findings\": \"A Python-based simulation framework (Biot–Savart with modified finite element ground-air boundary conditions) modeled magnetic flux density for three conductor configurations (horizontal, vertical, triangular) under balanced three-phase loading (132 kV, 100 A per phase) at 10 m height. The horizontal configuration produced the highest peak field (120 µT directly beneath; 104.2 µT at 1.5 m), exceeding the ICNIRP (2020) public limit of 100 µT, while the triangular layout had a lower peak (57.6 µT) and more uniform distribution across 0–2 m. Ground-air interactions increased local intensity at 1.5 m by 28.3% and boundary effects reduced spatial prediction error by 15–25%; measurements at 5/10/15 m showed maximum relative deviation 0.74% supporting model validity.\",\n  \"effect_direction\": \"mixed\",\n  \"limitations\": [],\n  \"evidence_strength\": \"insufficient\",\n  \"confidence\": 0.78,\n  \"peer_reviewed_likely\": \"yes\",\n  \"keywords\": [\n    \"magnetic fields\",\n    \"magnetic flux density\",\n    \"high-voltage power lines\",\n    \"transmission lines\",\n    \"Biot-Savart law\",\n    \"finite element\",\n    \"ground-air boundary conditions\",\n    \"ICNIRP 2020\",\n    \"public exposure limit\",\n    \"EMC planning\",\n    \"Python\",\n    \"NumPy\",\n    \"SciPy\",\n    \"Matplotlib\",\n    \"gaussmeter\",\n    \"conductor configuration\",\n    \"ACSR Linnet\",\n    \"132 kV\",\n    \"100 A\"\n  ],\n  \"suggested_hubs\": [\n    {\n      \"slug\": \"who-icnirp\",\n      \"weight\": 0.7,\n      \"reason\": \"Abstract explicitly compares modeled fields to the ICNIRP (2020) public exposure limit.\"\n    },\n    {\n      \"slug\": \"occupational-exposure\",\n      \"weight\": 0,\n      \"reason\": null\n    }\n  ]\n}"
  },
  "synthesis": null,
  "synthesisStatus": "pending",
  "originalHref": "https://pubmed.ncbi.nlm.nih.gov/41028797/",
  "sourceUrl": "https://rfsafe.org/mel/paper.php?id=5879",
  "updated": "2026-02-14 08:54:38"
}