Share

Implications of Incident Power Density Limits on Power and EIRP Levels of 5G Millimeter-Wave User Equipment

PAPERmanual2020engineeringEffect: unclearEvidence: Insufficient

Abstract

Implications of Incident Power Density Limits on Power and EIRP Levels of 5G Millimeter-Wave User Equipment Wang He, Bo Xu, Yuanqing Yao, Davide Colombi, Zhinong Ying, Sailing He. Implications of Incident Power Density Limits on Power and EIRP Levels of 5G Millimeter-Wave User Equipment IEEE Access. 10 Aug 2020. DOI: 10.1109/ACCESS.2020.3015231. Abstract User equipment (UE) is required to comply with the relevant radio frequency (RF) electromagnetic field (EMF) exposure limits, which are of relevance to establish the maximum permissible transmitted power and the maximum equivalent isotropically radiated power (EIRP). Recently, international RF EMF exposure guidelines, such as those published by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) as well as by the IEEE, have been updated. In this paper, the implications of the revised incident power density limits are investigated in terms of maximum permissible transmitted power and the maximum EIRP for devices operating in close proximity of the user. A similar analysis is conducted according to the US Federal Communications Commission (FCC) regulation on RF exposure. EMF compliance of UE is studied by means of numerical modelling of patch antenna arrays of different array sizes taking into consideration possible beam- steering operations, at frequencies ranging from 10 GHz to 100 GHz. The results are compared with the 3rd Generation Partnership Project (3GPP) requirements on the total radiated power (TRP) and EIRP levels. The present implications of the incident power density limits for 5G millimeter-wave UE will give valuable insights to mobile equipment manufacturers, network operators, and standardization bodies. : ieeexplore.ieee.org emf-portal.org

AI evidence extraction

At a glance
Study type
engineering
Effect direction
unclear
Population
—
Sample size
—
Exposure
RF >3000 MHz
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

The paper investigates how revised incident power density limits in updated RF EMF exposure guidelines/regulations (ICNIRP, IEEE, and FCC) affect the maximum permissible transmitted power and maximum EIRP for 5G mmWave user equipment operating close to the user, using numerical modelling of patch antenna arrays (including beam steering) from 10–100 GHz, and compares results with 3GPP TRP/EIRP requirements.

Outcomes measured

  • Maximum permissible transmitted power
  • Maximum equivalent isotropically radiated power (EIRP)
  • Compliance with incident power density limits
  • Comparison with 3GPP TRP/EIRP requirements

Limitations

  • No health outcomes are assessed
  • the work focuses on compliance implications and numerical modelling.
  • Specific quantitative results are not provided in the abstract.

Suggested hubs

  • who-icnirp (0.7)
    Discusses updated ICNIRP RF EMF exposure guidelines and their implications for device compliance.
  • 5g-policy (0.7)
    Analyzes regulatory/guideline incident power density limits (ICNIRP/IEEE/FCC) affecting permissible power/EIRP for 5G mmWave UE.
View raw extracted JSON
{
  "study_type": "engineering",
  "exposure": {
    "band": "mmWave",
    "source": "5G user equipment (UE)",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "Maximum permissible transmitted power",
    "Maximum equivalent isotropically radiated power (EIRP)",
    "Compliance with incident power density limits",
    "Comparison with 3GPP TRP/EIRP requirements"
  ],
  "main_findings": "The paper investigates how revised incident power density limits in updated RF EMF exposure guidelines/regulations (ICNIRP, IEEE, and FCC) affect the maximum permissible transmitted power and maximum EIRP for 5G mmWave user equipment operating close to the user, using numerical modelling of patch antenna arrays (including beam steering) from 10–100 GHz, and compares results with 3GPP TRP/EIRP requirements.",
  "effect_direction": "unclear",
  "limitations": [
    "No health outcomes are assessed; the work focuses on compliance implications and numerical modelling.",
    "Specific quantitative results are not provided in the abstract."
  ],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "5G",
    "millimeter-wave",
    "user equipment",
    "incident power density",
    "EIRP",
    "TRP",
    "beam steering",
    "patch antenna array",
    "ICNIRP",
    "IEEE",
    "FCC",
    "RF EMF exposure limits",
    "numerical modelling",
    "10–100 GHz"
  ],
  "suggested_hubs": [
    {
      "slug": "who-icnirp",
      "weight": 0.78,
      "reason": "Discusses updated ICNIRP RF EMF exposure guidelines and their implications for device compliance."
    },
    {
      "slug": "5g-policy",
      "weight": 0.72,
      "reason": "Analyzes regulatory/guideline incident power density limits (ICNIRP/IEEE/FCC) affecting permissible power/EIRP for 5G mmWave UE."
    }
  ]
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 2336

Implications of Incident Power Density Limits on Power and EIRP Levels of 5G Millimeter-Wave User Equipment · Non-native EMF