Radiofrequency dosimetry in subjects implanted with metallic straight wires: a numerical study.
Abstract
A numerical study to investigate the effects of the exposure to electromagnetic fields (EMF) at 900 and 1800 MHz on biological tissues implanted with thin metallic structures has been carried out, using the finite difference time domain (FDTD) solution technique. The results of the model show that the presence of a metallic wire yields to a significant increase in the local specific energy absorption rate (SAR). The present standards and/or guidelines on safe exposures of humans to EMF does not cover persons with implanted devices and thus the threshold levels to define safe exposure conditions might not apply in presence of high SAR gradients, such as the ones generated by thin metallic implanted objects. However, exposure to EMF fields below the actual safe levels even in presence of thin conductive structures cause rather low temperature rises (1 degrees C).
AI evidence extraction
Main findings
Numerical modeling showed that thin metallic wires implanted in biological tissues significantly increase local SAR at 900 and 1800 MHz. Despite high SAR gradients, temperature rises remain low (around 1°C) under exposure below current safety limits.
Outcomes measured
- local specific energy absorption rate (SAR) increase
- temperature rise in tissues
Limitations
- Numerical study only
- no in vivo or human data
- Focus on thin metallic wires only
- Temperature rise estimated
- not measured directly
View raw extracted JSON
{
"study_type": "in_vitro",
"exposure": {
"band": "RF",
"source": null,
"frequency_mhz": 900,
"sar_wkg": null,
"duration": null
},
"population": null,
"sample_size": null,
"outcomes": [
"local specific energy absorption rate (SAR) increase",
"temperature rise in tissues"
],
"main_findings": "Numerical modeling showed that thin metallic wires implanted in biological tissues significantly increase local SAR at 900 and 1800 MHz. Despite high SAR gradients, temperature rises remain low (around 1°C) under exposure below current safety limits.",
"effect_direction": "mixed",
"limitations": [
"Numerical study only, no in vivo or human data",
"Focus on thin metallic wires only",
"Temperature rise estimated, not measured directly"
],
"evidence_strength": "low",
"confidence": 0.5,
"peer_reviewed_likely": "yes",
"keywords": [
"radiofrequency",
"dosimetry",
"metallic implants",
"specific absorption rate",
"numerical modeling",
"finite difference time domain"
],
"suggested_hubs": []
}AI can be wrong. Always verify against the paper.
Comments
Log in to comment.
No comments yet.
NNEMF synthesis
Synthesis pending.