Share

Body position can be monitored in 3D using miniature accelerometers and earth-magnetic field sensors.

B Kemp, A J Janssen, B van der Kamp

PAPERpubmedElectroencephalography and clinical neurophysiology1998engineeringEffect: unclearEvidence: Insufficient

Abstract

OBJECTIVES: The study and diagnosis of movement disorders can be improved by monitoring body position simultaneously with the EMG. METHODS: We developed a monitor of the 3-dimensional (3D) orientation of body parts that can be applied in long-term ambulatory recordings in the daily life of a patient. The 3D sensor combines miniature sensors for earth's gravity and magnetism. It measures 60 x 50 x 10 mm and draws less than 1 mA of current from +/-5 V battery power. The non-horizontal direction of earth magnetism, as well as torque (pronation) of the body part, is corrected mathematically. RESULTS: This results in a measurement of the 3D orientation of a body part in terms of vertical inclination and horizontal azimuth. CONCLUSIONS: Calibration measurements indicate that this method is fairly accurate and practically applicable.

AI evidence extraction

At a glance
Study type
engineering
Effect direction
unclear
Population
—
Sample size
—
Exposure
earth-magnetic field sensors
Evidence strength
Insufficient
Confidence: 66% · Peer-reviewed: yes

Main findings

The authors developed a wearable 3D orientation monitor combining miniature gravity and earth-magnetic field sensors for long-term ambulatory recordings. Calibration measurements indicated the method was fairly accurate and practically applicable for measuring vertical inclination and horizontal azimuth.

Outcomes measured

  • 3D orientation/body position monitoring (vertical inclination
  • horizontal azimuth)
  • Calibration accuracy/practical applicability
View raw extracted JSON
{
  "study_type": "engineering",
  "exposure": {
    "band": null,
    "source": "earth-magnetic field sensors",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "3D orientation/body position monitoring (vertical inclination, horizontal azimuth)",
    "Calibration accuracy/practical applicability"
  ],
  "main_findings": "The authors developed a wearable 3D orientation monitor combining miniature gravity and earth-magnetic field sensors for long-term ambulatory recordings. Calibration measurements indicated the method was fairly accurate and practically applicable for measuring vertical inclination and horizontal azimuth.",
  "effect_direction": "unclear",
  "limitations": [],
  "evidence_strength": "insufficient",
  "confidence": 0.66,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "body position",
    "3D orientation",
    "accelerometers",
    "earth-magnetic field",
    "magnetism sensors",
    "ambulatory monitoring",
    "movement disorders",
    "EMG"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 4078

Body position can be monitored in 3D using miniature accelerometers and earth-magnetic field sensors. · Non-native EMF