Share

Impact of one's own mobile phone in stand-by mode on personal radiofrequency electromagnetic field exposure.

Damiano Urbinello, Martin Röösli

PAPERpubmedJournal of exposure science & environmental epidemiology2013randomized trialEffect: mixedEvidence: Moderate

Abstract

When moving around, mobile phones in stand-by mode periodically send data about their positions. The aim of this paper is to evaluate how personal radiofrequency electromagnetic field (RF-EMF) measurements are affected by such location updates. Exposure from a mobile phone handset (uplink) was measured during commuting by using a randomized cross-over study with three different scenarios: disabled mobile phone (reference), an activated dual-band phone and a quad-band phone. In the reference scenario, uplink exposure was highest during train rides (1.19 mW/m(2)) and lowest during car rides in rural areas (0.001 mW/m(2)). In public transports, the impact of one's own mobile phone on personal RF-EMF measurements was not observable because of high background uplink radiation from other people's mobile phone. In a car, uplink exposure with an activated phone was orders of magnitude higher compared with the reference scenario. This study demonstrates that personal RF-EMF exposure is affected by one's own mobile phone in stand-by mode because of its regular location update. Further dosimetric studies should quantify the contribution of location updates to the total RF-EMF exposure in order to clarify whether the duration of mobile phone use, the most common exposure surrogate in the epidemiological RF-EMF research, is actually an adequate exposure proxy.

AI evidence extraction

At a glance
Study type
randomized trial
Effect direction
mixed
Population
—
Sample size
—
Exposure
RF mobile phone · during commuting (train/public transport and car; stand-by mode with periodic location updates)
Evidence strength
Moderate
Confidence: 74% · Peer-reviewed: yes

Main findings

In a randomized cross-over commuting measurement study, uplink exposure in the reference (disabled phone) scenario was highest during train rides (1.19 mW/m^2) and lowest during rural car rides (0.001 mW/m^2). In public transport, the impact of the participant’s own phone in stand-by mode was not observable due to high background uplink from other people’s phones, whereas in a car an activated phone produced uplink exposure orders of magnitude higher than the reference scenario. The authors conclude that personal RF-EMF exposure measurements are affected by one’s own phone in stand-by mode because of regular location updates.

Outcomes measured

  • Personal RF-EMF exposure measurements (uplink) during commuting
  • Uplink power density (mW/m^2) under different phone stand-by scenarios

Limitations

  • Sample size not reported in abstract
  • Frequencies/bands not quantified beyond dual-band vs quad-band
  • Exposure metric limited to uplink/power density during commuting
  • generalizability to other settings not stated
  • Background exposure from others may mask own-phone contribution in some environments
View raw extracted JSON
{
  "study_type": "randomized_trial",
  "exposure": {
    "band": "RF",
    "source": "mobile phone",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": "during commuting (train/public transport and car; stand-by mode with periodic location updates)"
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "Personal RF-EMF exposure measurements (uplink) during commuting",
    "Uplink power density (mW/m^2) under different phone stand-by scenarios"
  ],
  "main_findings": "In a randomized cross-over commuting measurement study, uplink exposure in the reference (disabled phone) scenario was highest during train rides (1.19 mW/m^2) and lowest during rural car rides (0.001 mW/m^2). In public transport, the impact of the participant’s own phone in stand-by mode was not observable due to high background uplink from other people’s phones, whereas in a car an activated phone produced uplink exposure orders of magnitude higher than the reference scenario. The authors conclude that personal RF-EMF exposure measurements are affected by one’s own phone in stand-by mode because of regular location updates.",
  "effect_direction": "mixed",
  "limitations": [
    "Sample size not reported in abstract",
    "Frequencies/bands not quantified beyond dual-band vs quad-band",
    "Exposure metric limited to uplink/power density during commuting; generalizability to other settings not stated",
    "Background exposure from others may mask own-phone contribution in some environments"
  ],
  "evidence_strength": "moderate",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "RF-EMF",
    "personal exposure measurement",
    "mobile phone",
    "stand-by mode",
    "location update",
    "uplink",
    "commuting",
    "randomized cross-over",
    "power density"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 4496

Impact of one's own mobile phone in stand-by mode on personal radiofrequency electromagnetic field exposure. · Non-native EMF