Application of microwave radiation to biofilm heating during wastewater treatment in trickling filters.
Abstract
The purpose of this study was to demonstrate the potential for improving wastewater treatment by the application of microwave radiation (MW) compared to convective heating (CH) of trickling filters. Microwaves were delivered to the biofilm in a continuous and intermittent way to obtain temperatures of 20, 25, 35 and 40 °C. Although there was no effect of MW on organic removal, the observed yield coefficient was lower during the continuous MW supply compared to the periodic dosage and CH. The presence of organic compounds in the influent and continuous biofilm exposure to MW resulted in ca. 10% higher efficiency and ca. 20% higher rate of nitrification compared to intermittent MW dosage and CH. Independent of the method of reactor heating, the absence of organic carbon in the influent induced a significant increase in ammonium oxidation efficiency at 20-35 °C. Despite the aerobic conditions in trickling filters, nitrogen loss was observed.
AI evidence extraction
Main findings
Microwave heating of trickling filters (continuous or intermittent) was compared with convective heating at 20, 25, 35, and 40 C. No effect of microwave heating on organic removal was observed. Continuous microwave exposure (with organic compounds in the influent) was associated with ~10% higher nitrification efficiency and ~20% higher nitrification rate compared with intermittent microwave dosing and convective heating, and a lower observed yield coefficient than periodic dosing and convective heating.
Outcomes measured
- organic removal
- yield coefficient
- nitrification efficiency
- nitrification rate
- ammonium oxidation efficiency
- nitrogen loss
Limitations
- Microwave frequency and dosimetry (e.g.
- SAR) were not reported in the abstract.
- Sample size and replication were not reported in the abstract.
- Findings are in an engineered wastewater treatment system
- no human/animal health outcomes were assessed.
View raw extracted JSON
{
"study_type": "other",
"exposure": {
"band": "microwave",
"source": "wastewater treatment reactor (trickling filters)",
"frequency_mhz": null,
"sar_wkg": null,
"duration": "continuous and intermittent application"
},
"population": null,
"sample_size": null,
"outcomes": [
"organic removal",
"yield coefficient",
"nitrification efficiency",
"nitrification rate",
"ammonium oxidation efficiency",
"nitrogen loss"
],
"main_findings": "Microwave heating of trickling filters (continuous or intermittent) was compared with convective heating at 20, 25, 35, and 40 \u0000C. No effect of microwave heating on organic removal was observed. Continuous microwave exposure (with organic compounds in the influent) was associated with ~10% higher nitrification efficiency and ~20% higher nitrification rate compared with intermittent microwave dosing and convective heating, and a lower observed yield coefficient than periodic dosing and convective heating.",
"effect_direction": "mixed",
"limitations": [
"Microwave frequency and dosimetry (e.g., SAR) were not reported in the abstract.",
"Sample size and replication were not reported in the abstract.",
"Findings are in an engineered wastewater treatment system; no human/animal health outcomes were assessed."
],
"evidence_strength": "low",
"confidence": 0.74,
"peer_reviewed_likely": "yes",
"keywords": [
"microwave radiation",
"biofilm",
"wastewater treatment",
"trickling filters",
"convective heating",
"nitrification",
"ammonium oxidation",
"yield coefficient"
],
"suggested_hubs": []
}AI can be wrong. Always verify against the paper.
Comments
Log in to comment.
No comments yet.
NNEMF synthesis
Synthesis pending.