Share

Microstructure and electrical property of TiNx films deposited by DC reactive magnetron sputtering superimposed electromagnetic field system.

Ji Bong Park, Jung Hyuk Kim, Sang Hyun Cho, Chung Gil Kang, Pung Keun Song

PAPERpubmedJournal of nanoscience and nanotechnology2012engineeringEffect: benefitEvidence: Insufficient

Abstract

TiNx films were successfully deposited by DC reactive magnetron sputtering superimposed EMF system without substrate heating. In case of DCMS 400 W+ EMF 25 W, electrical property, reflectance and crystallinity of the TiN films were clearly improved by the enhancement of nitrification. The lowest sheet resistance of 2.9 Ω/⟂ (resistivity 5.8 x 10(-5) Ωcm) was observed for the film deposited at F(N)2: 16%. Mixture phases of the (111) plane and (200) plane showed lower resistivity than only (200) single phase. Therefore it is confirmed that introduction of EMF system is promising technology to deposit TiN film.

AI evidence extraction

At a glance
Study type
engineering
Effect direction
benefit
Population
—
Sample size
—
Exposure
superimposed electromagnetic field system (during DC reactive magnetron sputtering)
Evidence strength
Insufficient
Confidence: 74% · Peer-reviewed: yes

Main findings

TiNx (TiN) films deposited using DC reactive magnetron sputtering with a superimposed EMF system showed improved electrical properties, reflectance, and crystallinity compared with the stated DCMS+EMF condition, attributed to enhanced nitrification. The lowest sheet resistance reported was 2.9 Ω/⟂ (resistivity 5.8 × 10^-5 Ω·cm) at F(N)2 = 16%, and mixed (111)/(200) phases had lower resistivity than a (200) single phase.

Outcomes measured

  • TiNx/TiN film microstructure
  • electrical properties (sheet resistance
  • resistivity)
  • reflectance
  • crystallinity
  • nitrification

Limitations

  • No EMF frequency
  • field strength
  • or exposure characterization details provided in the abstract
  • No sample size or number of films/replicates stated
  • Engineering/materials outcomes only
  • no biological or health endpoints
View raw extracted JSON
{
  "study_type": "engineering",
  "exposure": {
    "band": null,
    "source": "superimposed electromagnetic field system (during DC reactive magnetron sputtering)",
    "frequency_mhz": null,
    "sar_wkg": null,
    "duration": null
  },
  "population": null,
  "sample_size": null,
  "outcomes": [
    "TiNx/TiN film microstructure",
    "electrical properties (sheet resistance, resistivity)",
    "reflectance",
    "crystallinity",
    "nitrification"
  ],
  "main_findings": "TiNx (TiN) films deposited using DC reactive magnetron sputtering with a superimposed EMF system showed improved electrical properties, reflectance, and crystallinity compared with the stated DCMS+EMF condition, attributed to enhanced nitrification. The lowest sheet resistance reported was 2.9 Ω/⟂ (resistivity 5.8 × 10^-5 Ω·cm) at F(N)2 = 16%, and mixed (111)/(200) phases had lower resistivity than a (200) single phase.",
  "effect_direction": "benefit",
  "limitations": [
    "No EMF frequency, field strength, or exposure characterization details provided in the abstract",
    "No sample size or number of films/replicates stated",
    "Engineering/materials outcomes only; no biological or health endpoints"
  ],
  "evidence_strength": "insufficient",
  "confidence": 0.74,
  "peer_reviewed_likely": "yes",
  "keywords": [
    "TiNx",
    "TiN",
    "DC reactive magnetron sputtering",
    "superimposed EMF system",
    "nitrification",
    "sheet resistance",
    "resistivity",
    "crystallinity",
    "reflectance"
  ],
  "suggested_hubs": []
}

AI can be wrong. Always verify against the paper.

AI-extracted fields are generated from the abstract/metadata and may be incomplete or incorrect. This content is for informational purposes only and is not medical advice.

Comments

Log in to comment.

No comments yet.

NNEMF synthesis

Synthesis pending.

Original record: rfsafe.org paper 4525

Microstructure and electrical property of TiNx films deposited by DC reactive magnetron sputtering superimposed electromagnetic field system. · Non-native EMF